Schematic PIC Wireless Networks Wifi (Hotspot) Detector

This wireless detector project allows you to sense the presence and relative signal strength of wireless hotspots. It is "always on" and communicates the presence and signal strength of an in-range hotspot by way of sequences of pulses - like a heartbeat you can feel. The stronger and faster the "heartbeat", the stronger the wireless signal detected.

This project consists of a microcontroller PIC 12F629, some custom interface electronics, a small vibe motor, and an off-the-shelf Wi-Fi detector from D-Link. The microcontroller periodically "presses" the button on the detector to initiate a reading. The microcontroller "reads" the output from the detector indicator LEDs and uses this as the basis for pulsing out a signal on the vibe motor, which the wearer can feel.

tag : wireless networks, hotspot detector, Wi-Fi strength signal indicator src

read more "Schematic PIC Wireless Networks Wifi (Hotspot) Detector"

Control :: What's Virtual PLC?

The commons PLC's (Programmable Logic Controllers) are micro controller circuits boards used for automation of industrial process...

read more "Control :: What's Virtual PLC?"

Schematic AVR Digital Clock with Roman Numerals

This digital clock project will display a Roman number instead Hindu-Arabic numeral system (1,2,3... ). The project uses micro ATTINY2313 as main processor and LCD to display the clock. When you turn on the device, it will shows a screen flashes "Tempera tempus" as reminder to adjust the time.


The adjustment is done via the small button.

• Press and hold the button for about 3 seconds -> hours appear on the screen -> release the button.
• Press the button again and hold -> the hours advance from "I" to "XXIV" -> release the button on the time right.
• Wait about 3 seconds -> minutes to appear on the screen.
• Press the button and hold -> the minutes advance from "nothing" to "LIX" -> release on just minutes.

Unfortunately, you have to readjust the time after your turn off the power, because there is no RTC in this  project.

Download schematic and source code here

read more "Schematic AVR Digital Clock with Roman Numerals"

Schematic Simple PIC RF/Microwave Frequency Counter

This RF/Microwave Frequency Counter project built based on PIC 16F876A. The basic counter rate is extended to at least 180MHz using two 74Fxx devices. A divide-by-64 prescaler is used for higher frequencies up to at least 4.5GHz. All results of the measurement are shown on an inexpensive, 2x16 alphanumeric LCD module with large characters.

There are 3 inpust on this project a microwave (prescaled) input, an RF input and a TTL input. The microwave and RF inputs are AC coupled and terminated to a low impedance (around 50ohms). The TTL input is DC coupled and has a high input impedance. A progress-bar indicator is provided on the LCD for the gate timing.

Both the microwave and RF inputs have an additional feature : a simple signal-level detector driving yet another bar indicator on the LCD module. This is very useful to check for the correct input-signal level as well as an indicator for circuit tuning or absorption-wave-meter dip display (Lecher wires). This project designed by Matjaz Vidmar.

tag : RF counter, Microwave Frequency counter, PIC project source

read more "Schematic Simple PIC RF/Microwave Frequency Counter"

Schematic Smartphone AVR DTMF Remote Control

This project based on Microcontroller AVR ATtiny 2313 and SmartPhone as main part. The project can controls 3 relays by DTMF sounds emitted by a Smartphone. Emilio, the designer, said that this project useful for controlling, for example a rover, using relay as motor power switches.

The Smartphone (with Windows Mobile 6 OS) can run as web server with capture ability and send the picture to the client via internet. Other features of this circuit is the Smartphone can also moved and controlling motors with his speaker, emitting the correct dial tones in relation to GET requests from internet client. It's not necessary to make any connection from the phone to the circuit, because the phone connects "wireless" using the sound.

You can download test program written for smartphone WM6, schematic, and hex file here

Tag: DTMF Remote, Smartphone, Wireless Remote, Remote control, AVR project

read more "Schematic Smartphone AVR DTMF Remote Control"

Schematic AVR Shark Tag Project

The goal of this project was to develop a shark tag working bench-top microcontroller platform. It is to be used for on-animal, in-situ data logging applications involving sharks and potentially other large pelagic.

The project used the Atmel Mega32 microcontroller to develop the core platform and functionality of a data archival tag. The project use temperature and pressure as sensor variable. The tasks ranged from logging sensor data to developing a simple user interface that requires only the addition of a laptop and a custom RS232 serial cable in the field.

It used an off-the-shelf SD (Secure Digital) card using flash memory for large capacity multi-read/write data storage. The microcontroller’s ADCs (analog to digital converters) were used to convert analog voltages produced by select sensors into digital format.

Tag: Animal Tag, shark, data logging, avr project src

read more "Schematic AVR Shark Tag Project"

Schematic AVR Shark Tag Project

The goal of this project was to develop a shark tag working bench-top microcontroller platform. It is to be used for on-animal, in-situ data logging applications involving sharks and potentially other large pelagic.

The project used the Atmel Mega32 microcontroller to develop the core platform and functionality of a data archival tag. The project use temperature and pressure as sensor variable. The tasks ranged from logging sensor data to developing a simple user interface that requires only the addition of a laptop and a custom RS232 serial cable in the field.

It used an off-the-shelf SD (Secure Digital) card using flash memory for large capacity multi-read/write data storage. The microcontroller’s ADCs (analog to digital converters) were used to convert analog voltages produced by select sensors into digital format.

Tag: Animal Tag, shark, data logging, avr project src

read more "Schematic AVR Shark Tag Project"